beautypg.com

Service/parts information, Service parts, Warranty information – American Dryer Corp. D170 User Manual

Page 21: Returning warranty cards warranty, Routine maintenance, Cleaning

background image

113376-4

Telephone 01422 822282

21

Routine Maintenance _________________

Cleaning

A program and/or schedule should be established for periodic
inspection, cleaning, and removal of lint from various areas
of the dryer, as well as throughout the ductwork system. The
frequency of cleaning can best be determined from
experience at each location. Maximum operating efficiency
is dependent upon proper air circulation. The accumulation
of lint can restrict this airflow. If the guidelines in this section
are met, a JLA dryer will provide many years of efficient,
trouble free, and most importantly, safe operation.

Warning

Lint from most fabrics is highly combustible. The
accumulation of lint can create a potential fire

hazard.
Keep dryer area clear and free from combustible materials,
gasoline, and other flammable vapors and liquids.

Note

Remove power from the dryer before performing
any maintenance in the dryer (cleaning the lint

drawers and both steam coil lint screens are the only
exceptions).
Suggested time intervals shown are for average usage,
which is considered 6 to 8 operational (running) hours per
day.

Important

Dryer produces combustible lint and must be
exhausted to the outdoors. Every 6 months,

inspect the exhaust ducting and remove any lint buildup.

Clean lint from lint drawer/screen every third or fourth load.

Note

The frequency of cleaning the lint screens can
best be determined from experience at each

location.

Weekly

Clean lint accumulation from the lint chamber, thermostat,
and microprocessor temperature sensor (sensor bracket)
area.

Warning

To avoid hazard of electrical shock, discontinue
electrical power supply to the dryer.

Steam Dryers

Clean the steam coil fins. Suggest using compressed air
and a vacuum cleaner with brush attachment.

Note

When cleaning steam coil fins, be careful not to
bend the fins. If fins are bent, straighten by using

a fin comb, which is available from any local
air-conditioning supply house.

Service/Parts Information ____________

Service

Service must be performed by a qualified trained technician,
service agency, or gas supplier. If service is required, contact
the distributor from whom the equipment was purchased. If
the distributor cannot be contacted or is unknown, contact
the Service Department for a distributor in your area.

Note

When contacting the Service Department, be sure
to give them the correct model number and serial

number so that your inquiry is handled in an expeditious
manner.

Parts

Replacement parts should be purchased from the distributor
from whom the equipment was purchased. If the distributor
cannot be contacted or is unknown, contact the Parts
Department for a distributor in your area. Parts may also be
purchased directly from the Parts Department by calling
01422 822282 or you may FAX in your order at 01422 824390.

Note

When ordering replacement parts from the
distributor or the manufacturer, be sure to give

them the correct model number and serial number so that
your parts order can be processed in an expeditious
manner.

Warranty Information _________________

Returning Warranty Cards

Before any dryer leaves the factory test area, a warranty card
is placed on the back side of the main door glass. These
warranty cards are intended to serve the customer where we
record the individual installation date and warranty information
to better serve you should you file a warranty claim. If a
warranty card did not come with your dryer, contact the
Warranty Department.

Important

A separate warranty card must be completed and
returned for each individual dryer.

Note

Be sure to include the installation date when
returning the warranty card(s).

Warranty

For a copy of the commercial warranty covering your particular
dryer(s), contact the distributor from whom you purchased
the equipment and request a dryer warranty form. If the
distributor cannot be contacted or is unknown, warranty
information can be obtained by contacting the Warranty
Department.

Note

Whenever contacting the manufacturer for
warranty information, be sure to have the dryer’s

model number and serial number available so that your
inquiry can be handled in an expeditious manner.

!

!

!

!

!

!

!

!

!

!

!