Hot Max Torches 100MC - Manual (Page 6)

Assembly Instructions
KDAR Company 5
Step 7 - For Use with MM-1 Mobile
Max Torch Kits
Attach finger holder bracket (Item 5) with a 6 x
34 mm bolt (Item 15) and 6 mm nut (Item 16).
Note: If you plan to use the cart with a propane
tank, you may find that the finger holder bracket
is in the way so you may not want to install this
bracket.
Step 8
Now it is time to install your MM-1 Mobile Max
Torch Kit or your 20# or 40# propane tank.
For the MM-1 Mobile Max, place the handle of
the tote over the finger holder and let the bottom
of the tote rest on the platform. Secure the tote
with the two red straps attached at the loops to the
short J-Hooks on the base frame. Make sure the
buckle tightens down on the opposite strap and
holds the MM-1 in place.
For the propane tank installation, simply place the
tank on the platform and secure the tank with the
two red straps attached at the loops to the short J-
Hooks on the base frame. Make sure the buckle
tightens down on the opposite strap and holds the
tank in place.
Assembly is complete!