Hot Max Torches 100MC - Manual (Page 5)

Assembly Instructions
KDAR Company 4
Step 5
Attach the spring clips (Item 6) to the handle up-
rights with two 5 x 32 mm Philips head machine
screws (Item 12) and 5 mm nuts (Item 13). Tight-
en these all the way with a Philips screw driver
and a 8 mm wrench.
Step 6
Thread a 6 mm nut onto the long J-Hooks (Item
7) until it reaches the end of the threads (flat part
of the nut head towards the handle. Insert the
long J-Hook (Item 7) into the handle uprights and
thread on another 6 mm nut (Item 16) on the front
of the cart just until the threads come all the way
through the nut. Now tighten the nut on the back
with a 10 mm wrench until tight. Repeat for the
other side.