Dake Movable Table - Elecdraulic I /42 series 400's - Manual (Page 5)

M
od
el
42
-4
03
05
/1
0
5
84487
All pins must be inserted before applying any
pressure. Read instructions. Mount centered on
channel to right of table pins as shown.
84400
Guard workplace to prevent projectiles from
reaching operator. Mount ½” below stop
block or at eye level centered on flange as
shown
67881
Release table rollers before
applying pressure. Mount in
center of table channel as shown.
84399
Keep fingers out of pin holes. Mount
centered on channel to left of table pins as
shown.
27823
Mount ½” below block.
84396
Keep hands away from point of operation
84401
Establish solid footing to prevent falls.
84395
High voltage.
76462
Lockout procedure