Installation – Electrolux ENN2814COW User Manual
Page 16
7. INSTALLATION
WARNING!
Read the "Safety Information"
carefully for your safety and cor-
rect operation of the appliance
before installing the appliance.
7.1 Positioning
Install this appliance at a location where
the ambient temperature corresponds to
the climate class indicated on the rating
plate of the appliance:
Cli-
mate
class
Ambient temperature
SN
+10°C to + 32°C
N
+16°C to + 32°C
ST
+16°C to + 38°C
T
+16°C to + 43°C
7.2 Electrical connection
Before plugging in, ensure that the volt-
age and frequency shown on the rating
plate correspond to your domestic power
supply.
The appliance must be earthed. The pow-
er supply cable plug is provided with a
contact for this purpose. If the domestic
power supply socket is not earthed, con-
nect the appliance to a separate earth in
compliance with current regulations, con-
sulting a qualified electrician.
The manufacturer declines all responsibili-
ty if the above safety precautions are not
observed.
This appliance complies with the E.E.C.
Directives.
7.3 Installation of the CLEANAIR CONTROL Filter
TheCLEANAIR CONTROL Filter is an ac-
tive carbon filter which absorbs bad odors
maintain the best flavour and aroma for all
foodstuffs without risk of odor cross con-
tamination.
On delivery the carbon filter is in a plastic
bag to preserve performance.
The filter should be placed in the drawer
before the appliance is turned on.
• Open the drawer.
• Take the filter out of the plastic bag.
• Insert the filter in the drawer.
• Close the drawer.
The filter should be handled care-
fully so fragments do not loosen
from the surface.
Make sure that the air lever draw-
er is closed to obtain proper func-
tion.
7.4 Door reversibility
16 www.electrolux.com