Summers 3Pt Supersprayer - Manual (Page 21)

15
SECTION 3 - SPRAYER OPERATION
6. FEED LINES FOR 3-PT. DRY BOOM SPRAYERS
The center boom is fed from center electronic ball valves to 3-way nozzle tee on center boom using 1/2” line. Left and
Right booms are fed with 3/4” feed line from left and right ball valves respectively. Hose clamps are used to fasten 1/2”
and 3/4” feed lines. Feed lines must be routed so there is enough slack to allow machine to be placed in transport
position. Left and right boom feed lines should run under boom transport guide on each main boom. Allow enough slack
in feed lines to prevent over stretching in transport position.
7. 60 TO 90 FOOT CABLE SUSPENDED BOOM NOZZLE SPACING
Nozzle spacing for the Summers wet boom field sprayers is 20 inches with equal distance from sprayer centerline. The
first nozzle is 10 inches from the sprayer centerline on rear center boom with each consecutive nozzle in 20 inch incre-
ments.
8. NOZZLE TO BOOM ORIENTATION