Bloom Manufacturing 1400 Series - Manual (Page 2)

1. General Safety Requirements 4. Speed Reducer Break In
2. Warranty 5. Speed Reducer Installation
3. Maintenance & Repair 6. Speed Reducer Operation
(a) Clean and Inspect (a) Automatic Safety Brakes & Adjustment
T A B L E O F C O N T E N T S
(a) Clean and Inspect (a) Automatic Safety Brakes & Adjustment
(b) Oil Change Information
(c) Oil Level
(d) Recommended Gear Oil
(e) Attachments (parts list, assembly)
Please note that not all of the above
sections apply to each model purchased
Merchandise may not be returned without approval from factory. The customer will be charged for placing the returned
goods in salable condition plus a restocking charge of 25%. All returns must be shipped prepaid.
Section 1 General Safety Requirements Section 1 General Safety Requirements
Take Note! This Safety Alert Symbol Found Throughout This
Manual Is Used To Call Your Attention To Instructions Involving
Your Personal Safety And The Safety Of Others. Failure To
THIS SYMBOL MEANS
• Attention!
• Become Alert! y y
Follow These Instructions Can Result In Injury Or Death.
Become Alert!
• Your Safety Is Involved
SIGNAL WORDS: Note the use of the signal words DANGER, WARNING AND CAUTION with the safety messages.
The appropriate signal word for each has been selected using the following guidelines:
DANGER: Indicates an imminently hazardous situation that, if not avoided, will result in death or serious injury. This
signal word is to be limited to the most extreme situations typically for machine components which, for functional
purposes, cannot be guarded.
WARNING: Indicates a potentially hazardous situation that, if not avoided, could result in death or serious injury,
and includes hazards that are exposed when guards are removed. It may also be used to alert against unsafe
practice.
CAUTION: Indicates a potentially hazardous situation that, if not avoided, may result in minor or moderate injury. It
may also be used to alert against unsafe practices.
2 For best results, only use Bloom replacement parts 800-394-1139