Airlink101 AP671W - Manual (Page 4)

8.2 Universal Repeater
Click on Site Survey, select the wireless router or AP you wish to repeat on
the popup Wireless Site Survey window and click Connect.
Configure a network name in Main SSID for the repeater to be identified.
8.3 AP Client
Click on Site Survey, select the wireless router or AP you wish to connect
on the popup Wireless Site Survey window and click Connect, or enter your
wireless network’s SSID manually. Click Next.
8.4 Point-to-Point / Point-to-MultiPoint / WDS Bridge
Same setup procedure applies to Point-to-Point Bridge, Point-to-MultiPoint
Bridge and WDS Bridge modes. For bridge mode, you need at least two
Access Points. We will use Point-to-Point Bridge as an example.
Select a channel number you wish to use and enter the MAC address of the
other Access Point for the bridge. Click Next.
Step 9
Configure the wireless security settings. It is recommended to use
WPA2-PSK(AES) which is the most secured encryption for general users.