OZ Lifting Products Beam Clamp OM - Manual (Page 5)

pg.5
Warnings
Failure to read and comply with the following warnings may result in a hazardous situation that
could lead to death, serious injury, or property damage.
Be sure to properly install, operate, and maintain the Beam Clamp so that it does not come off the
beam.
Do Not lift more than the designated clamping range.
Do Not lift people or lift loads over people.
Do Not operate a damaged or malfunctioning product.
Do Not remove, deface, or obscure warning labels.
Do Not operate until personnel are warned or cleared from the area.
Do Not use if load is not suspended vertically.
Do Not use beam clamp without a locking device.
Do Not use beam clamp as welding earth.
Do Not use the beam clamp for a buffer or grab.
Do Not add lengthening pieces to the beam clamp lever.
Do Not weld on the lifted load.
Do Not open the beam clamp when it is holding a load.
Do Not use beam clamps in chemical environments.
Do Not use connections between the clamp and load.
Do Not allow the load to swing.