Videoswitch Vi-series - Manual (Page 6)

BURNING INCIDENTS
To burn a section of video recording to CD, go to the middle section of the video or to the
particular image that you wish to backup using the FIND and PLAY facilities as described
in the FIND INFORMATION section. Then do the following:
• Call up the BURN-1 screen by pressing this key.
Note: If there is a CD in the CD
drive that is not blank, the BURN
screen will not be displayed.
BURN
• Create an “incident” by pressing this key.
Note: The time and Date
selected on the find screen will be
in the middle of this incident.
Note: The start and end times
can also be individually set and
multiple incidents may be burned
onto a single CD. Please refer to
the main manual for details.
TAG
• Change the duration of the incident as required
using the left/right keys:
Н
Н
Less time recorded
More time recorded
• Press the “Open CD drawer” button on the CD
drive and place a new CD-R in the CD drive.
IMPORTANT NOTE:
When an important incident has
been written to a CD, always check
that the CD plays back correctly,
either by playing it on the DVR or
on a PC. • Press the “Open CD drawer” button again to
close the drawer.
• Start writing to a blank CD by pressing this key:
OK