Record settings, 2 schedule, 3 resolution – Videoswitch Vi-R2000 Series User Manual
Page 19: 4 quality, 5 frame rate, 6 copy settings to all other cameras, 7 retention period tables, Schedule, Resolution, Quality
Vi-R2000 Series
Videoswitch Page
15
Mdr601a.doc
1.6. Record Settings
If you use the default configuration supplied (which may be reloaded at any time from a USB memory
stick), recording will be enabled for all cameras at Medium quality at a reasonable frame rate.
To adjust record setting to suit your application, enter the Record menu by pressing the MENU key
(hold for 1 second on a Vi-R2001), selecting Settings then selecting Record. The most important
things that need to be set are outlined in the following sections.
3.1.2 Schedule
For most applications, make sure the schedule is enabled for all connected cameras and for all times
of each day. This is indicated by all blocks being BLUE in the Schedule tab. If you need to set the
whole schedule:
1. Select
Schedule
screen
2. Select
Enable Schedule
3. Click
on
Apply
4. Click
on
OK
3.1.3 Resolution
Select the General screen. A resolution of 4CIF is recommended for best quality but it does use nearly
twice as much hard disc space as 2CIF which may also be used.
3.1.4 Quality
Medium quality is appropriate for most applications. If you change the quality setting, make sure you
also change the Max Bitrate (Kbps) to a value equal or higher to that indicated in this table:
2CIF
4CIF
Frames
per
second
Lowest
Lower
Low
Medium
Higher
Highest
Lowest
Lower
Low
Medium
Higher
Highest
1
147
221
258
295
370
518
295
370
445
518
592
890
2
167
252
295
336
421
590
336
421
506
590
675
1012
4
208
313
366
418
523
733
418
523
626
733
838
1258
6
250
375
438
500
626
877
500
626
751
877
1002
1503
8
291
436
510
582
728
1020
582
728
875
1020
1166
1750
3.1.5 Frame
Rate
The frame rate has next greatest impact on disc space usage. Refer to the tables in section 3.1.7 to
choose highest record rates that achieves sufficient retention of recordings.
3.1.6
Copy settings to all other Cameras
Once you have set one camera, you can copy these settings to all other connected cameras by
clicking on Copy.
3.1.7
Retention Period Tables
The time period for which video recording is retained for before being over-written depends on these
factors:
• Hard drive capacity (1 to 2 Tbyte)