American Acoustic Development THE CUB - Manual (Page 8)

SPECIFICATIONS
Speaker
Computer Optimized Enclosure
Speaker Frequency Response: 80Hz –15KHz
Speaker Compliment: 2x 5inch proprietary NEO-POWER, extended-range drivers
Speaker Sensitivity: 95dB/W/M
Internal Speaker Impedance: 4 Ohms
Dimensions (HxWxD): 170x300x320mm
6.5x11.8x12.5inch
Weight: 5.2 Kg / 11.5 Lbs
Amplifier
PJB 100watt Solid State class AB amplifier with soft clip feature
Signal to Noise Ratio
Better than 95 dB
Impedance
0dB Input: >4M
Ω /22pF
-10dB Input: >100K Ω /22pF
Pre Amp Out: < 2K Ω
Bal. Line Out: <200 Ω
Levels
0dB Input: 10mV-2.5V
-10dB Input: 20mV-5V
Pre Amp Out: 1.2V
FX send: 250mV
Bal. Line Out: Typical 100mV
Protection Circuits
1. AC line filter.
2. Slow-blow Fuse: 2.5A / 250V.
3. Smart Thermal Protection: auto turn down the output power to about 50% when the heat
sink temperature over 65º C.
4. Loudspeaker Short-Circuit Protection.
5. DC Output Protection.
Included Parts
12 ft AC Power Cord
7