Operation & positioning, Transporting and storing the cub – American Acoustic Development THE CUB User Manual
Page 7
the AC cable is more than 3A rating at 250-volt AC. If you require a longer AC power cord,
we recommend you use the AAD heavy-duty 20 foot power cords. These are available as
an accessory. Use a slow blow ¾ inch fuse rated at 2.5 amps.
OPERATION & POSITIONING
TURN THE VOLUME DOWN on the CUB before plugging in your instrument.
Positioning the CUB for Best Sound
It is recommended that you place the cub on a solid object or dedicated stand for best sound
and projection. Do not place on a high microphone stand as it will be unstable and easily
topple over.
TRANSPORTING AND STORING THE CUB
When transporting in a vehicle, it is recommended that you use an external case or heavy-duty
cover to prevent it being damaged by falling over or other objects falling on it. The Cub has an
optional padded carrying bag as an available accessory.
When Storing:
• Keep the CUB in a dry location preferably at room temperature.
• Do not store the CUB in temperatures below -20 Degrees C or above 40 Degrees C.
• Do not allow it to get wet. If this occurs, never turn it on in this condition.
• Do not leave the CUB connected to a power source for long periods of time.
6