Akiles UltraLam 250 - Manual

“ ULTRA-LAM” OPERATlONAL MANUAL
I N T R O D U C T I O N :
CONGRATULATIONS ON THE PURCHASE OF YOUR NEW ULTRA-LAM, A HEAVY DUTY POUCH
LAMINATOR. YOUR ULTRA-LAM WAS SPECIALLY DESIGNED WITH THE HIGHEST AVAILABLE
TECHNOLOGY AND PREMIUM QUALITY COMPONENTS, TO RENDER YOU A HIGH QUALITY LAMINATION,
AS WELL AS MANY YEARS OF TROUBLE-FREE SERVICE.
THE ULTRA-LAM CAN OPERATE WITH ANY STANDARD LAMINATING POUCH CURRENTLY IN THE MARKET.
IT WAS SPECIALLY DESIGNED TO OPERATE WITH OR WITHOUT A CARRIER NOTE: WE ONLY
RECOMMEND THE USE OF CARRIERS WITH INFERIOR QUALITY POUCHES (HIGH ADHESIVE
COMPOSITION i.e. 10 MILS (4/6) POUCHES), AS THEY MAY EXCRETE EXCESSIVE ADHESIVE, WHICH CAN
POTENTIALLY DAMAGE THE SYSTEM.
IMPORTANT: WE RECOMMEND THAT YOU TAKE A FEW MINUTES TO FAMILIARIZE YOURSELF WITH
THE FUNCTIONS OF YOUR NEW ULTRA-LAM. YOU WILL FIND OUT THAT WITH JUST A L.ITTLE PRACTICE,
ANY PERSON CAN ACHIEVE A PROFESSIONAL LAMINATION.
4. EXIT
O P E RAT I O N :
- PLACE YOUR NEW ULTRA-LAM ON TOP OF A WORKING TABLE.
- PLUG POINER TO A GROUNDED 110V OUTLET (220V FOR CERTAIN COUNTRIES)
- PRESS POWER SWITCH TO THE ON POSTION (2). THE POWER LIGHT WILL TURN ON INDICATING
THAT THE ULTRA-LAM HAS BEEN ACTIVATED.
- THE READY LIGHT (3) WILL TURN ON IN APPROXIMATELY 2-3 MINUTES, LETTING YOU KNOW THAT
THE ULTRA-LAM IS READY TO START LAMINATING.
- PRESS THE MOTOR SWITCH (1) TO THE ON POSTION.
- INTRODUCE THE DOCUMENT TO BE LAMINATED INTO THE POUCH.
- INTRODUCE THE POUCH (SEALED SIDE FIRST) INTO THE ENTRANCE (7) OF THE ULTRA-LAM.
- REMOVE THE POUCH FROM THE EXIT (4) OF THE ULTRA-LAM.
- PRESS “OFF” (1 & 2) THE ULTRA-LAM ONCE YOU ARE FINISHED LAMINATING.
- IMPORTANT: EACH UNIT HAS BEEN PRESET AT THE FACTORY AND REQUIRES NO ADJUSTMENTS
TO LAMINATE OUR 7 MIL POUCHES.
T I P S :
- ALWAYS TURN “OFF” THE ULTRA-LAM IF YOU WILL STOP LAMINATING FOR LONG PERIODS OF TIME.
- ALWAYS MAINTAIN THE ULTRA-LAM ON STAND BY (POWER “ON” POSITION) IF YOU WILL CONTINUE
LAMINATING WITHIN A FEW MINUTES. THIS FEATURE WILL ALLOW YOU TO INSTANTLY RE-START
LAMINATING, WITHOUT DEPRECIATING THE MOTOR OR ROLLERS.