Power Jacks Neeter Drive Range-PowerGear - Manual (Page 7)

7
SPIRAL BEVEL GEARBOXES RANGE “POWERGEAR”
11. Warranty Information
11.1 Limitation
of Responsibility
The ratings given in this manual were compiled using standard engineering procedures. The ratings are
designed to guide the customer in the selection of a unit. We do not guarantee the ratings in specific
applications. Prototype testing of every application is recommended before production. Our engineering
facilities are available for consultation at all times. Please ask us for assistance with linear motion and drive
application problems. This manual is designed to assist in the selection of a suitable linear motion or power
transmission product for economical, long and trouble free service.
Due to Power Jacks policy of continuous improvement, designs may be subject to change without notice.
Please ask for certified drawings.
11.2 Warranty
Subject to the condition stated herein, Power Jacks will repair or replace, without charge, any parts proven to
Power Jacks satisfaction to have been defective in material or workmanship. Claims must be made within one
year after date of shipment. Power Jacks will not repair or replace any parts that have become inoperative
because of improper maintenance, eccentric loading, overloading, chemical or abrasive action, excessive heat,
or other abuse. Equipment which has been altered or modified by anyone without Power Jacks authorisation,
is not warranted by Power Jacks. EXCEPT AS STATED HEREIN, POWER JACKS MAKES NO OTHER
WARRANTIES, EXPRESS OR IMPLIED INCLUDING WARRANTIES OF MERCHANTABILITY AND FITNESS
FOR A PARTICULAR PURPOSE.
WARNING: The equipment shown in this manual is intended for industrial use only and should not be used to
lift support, or otherwise transport people unless you have a written statement from Power Jacks Limited which
authorises the specific unit as used in your application for moving people.
© Power Jacks Limited 1987, Aberdeenshire, Scotland, United Kingdom
We reserve the right to alter details and specifications without notice.
Since special circumstances may affect the equipment’s operation, users should consult
POWER JACKS LIMITED at the address shown, or take other skilled engineering advice.
It is recommended that the application design load is conspicuously displayed.
© POWER JACKS LIMITED. May not be copied in whole or in part
POWER JACKS GROUP LIMITED
SOUTH HARBOUR ROAD, FRASERBURGH, ABERDEENSHIRE AB43 9BZ SCOTLAND
TELEPHONE: +44 (0) 1346 513131 FAX: +44 (0) 1346 516827
email: [email protected] http://www.powerjacks.com