Power Jacks Rolaram Linear Actuators - Manual (Page 7)

7 www.powerjacks.com
LINEAR ACTUATORS
|
Rolaram
3. Product Code for Rolaram® Actuators
The product code is of the following form:
Example Part Number
Notes: (1) The above part number defines a standard catalogue unit. Where a standard unit does not meet the
customer’s requirement, Power Jacks will be pleased to design a special unit.
(1) Product Code
An 8 digit code obtained from
Technical Charts (refer 2.2.6.)
(2) Drive Configuration
R - Right Angle
P - Parallel
H - In-Line
(3) Unguided/guided
P - Unguided Ram
K - Guided Ram
(1) Model R075 Actuator with linear speed of 600 mm/min
(2) Parallel Drive Configuration
(3) Guided Ram
(4) Stroke of 400 mm
(5) Screwed End Fitting
(6) Trunnion Mounting with Trunnion Feet and End Cap Foot
(7) With Proximity Switches
(8) Without Encoder
(4) Stroke
A 4 figure code to represent the
required stroke in mm.
(5) End Fitting
C - Clevis End
T - Top Plate
S - Screwed End
(6) Mounting
RC - Rear Clevis
TN - Trunnion withoutFeet
TF - Trunnion with Trunnion Feet
TE - Trunnion with Trunnion Feet and
End Cap Foot
(7) Proximity Switches
P - With stroke detecting Proximity
Switches
0 - Without stroke detecting Proximity
Switches
(8) Encoder
E - With Encoder
0 - Without Encoder
(1) (2) (3) (4) (5) (6) (7) (8)
(1) (2) (3) (4) (5) (6) (7) (8)
R 0 7 5 0 6 0 0 P K 0 4 0 0 S T E P 0