VHT Special 6 Ultra Head - Manual (Page 6)

Ultra Input V1A V1B Clean Ultra Level V2A V2B V3 Send Receive
Line Out
Depth Watts Texture Speaker Pull Boost Volume Tone Tone Stack
BLOCK DIAGRAM REAR PANEL FEATURES CONTINUED
4. Impedance Selector: This 3-position slide switch selects the appropriate output impedance to match your speaker cabinet’s impedance.
5. Speaker Output Jacks: These two jacks are wired in parallel. The Special 6 Ultra combo has a 16-ohm speaker that is connected to the
internal speaker jack. The combo’s speaker remains connected when using the external Speaker Output jacks. When using the combo with an
additional speaker cabinet, switch the Impedance selector to 8 ohms.
6. Power IEC Receptacle: Use the included power cord with this unit in accordance with the AC line voltage and frequency ratings listed on
this manual and rear panel of this amplifier. For lowest noise and safest operation, always provide the amplifier with proper AC grounding.
7 8