Connecting usb storage devices, Kit contents – HighPoint RocketU 1022A User Manual
Page 6
6
Connecting USB Storage Devices
1.
Make sure the RocketU 1022A/Rocket U Dual USB 3.0 for Mac has been
installed into your PC or Mac.
2.
Connect the enclosure or hard disk to the HighPoint RocketU HBA with USB 3.0
cables.
3.
Allow the drives/enclosure to spin up for a few moments. Once the devices are
ready, they will be recognized by the operating system and can be accessed as
needed.
Kit contents
RocketU 1022A / RocketU Dual USB 3.0 for Mac host controller
Software CD
Quick Installation Guide
Low profile bracket