HighPoint RocketU 1144E - Manual (Page 6)

6
4. The following file should be displayed if installation was successful:
-'system32\DRIVERS\asmtxhci.sys'
eSATA Driver Installation
Driver Installation: Microsoft Windows
1. Insert the HighPoint Software CD into the system’s CD/DVD drive.
2. Select 'Control Panel'  'Hardware'  'Device Manager' 
'Other Device'. And Right-click on 'RAID Controller'.
3. Select 'Properties'  'Update driver software' tab.
4. Browse to the following software CD folder:
\RocketU\RU1022x_112x_114x\eSATA\Windows
Verifying Driver Installation
1. On the Start menu, select 'Control Panel'  'Device Manager' 
'Storage controllers' button.
2. If the driver was properly installed, an entry for “RocketU 1144E
Controller” will be displayed.
Driver Installation: Mac OS X
Note: The USB 3.0 driver is imbedded into Mac OS X 10.8 and newer.
Mac systems will automatically detect and install the appropriate
driver for RocketU 1144E controller.
1. After booting the Mac system, click 'System Information'  'PCI
Cards'. Two PCI entries labeled 'pci1103,1042' will be displayed.
2. Insert the RocketU Series Software CD into your Mac DVD drive and
navigate to the Mac Software package folder: