HighPoint Data Center 7280 - Manual (Page 8)

2 ‐ Installing the RocketRAID Host Adapter
Note: Make sure the system is powered‐off before installing the DataCenter host adapter.
1. Open the system chassis and locate an unused PCI‐Express x8.
2. Remove the PCI slot/bracket cover.
3. Gently insert the DataCenter card into the PCI‐Express slot, and secure the bracket to the system
chassis (illustration shows DataCenter 7280).
Pin Number
Pin 1 Pin 2 Pin3 Pin4
A1 Drive1 Drive2 Drive3 Drive4
A2 Drive5 Drive6 Drive7 Drive8
A3 Drive9 Drive10 Drive11 Drive12
A4 Drive13 Drive14 Drive15 Drive16
A5 Drive17 Drive18 Drive19 Drive20
A6 Drive21 Drive22 Drive23 Drive24
A7 Drive25 Drive26 Driver27 Drive28
A8 Driver29 Driver30 Driver31 Drive32
F1 Drive1 Drive2 Drive3 Drive4
F2 Drive5 Drive6 Drive7 Drive8
F3 Drive9 Drive10 Drive11 Drive12
F4 Drive13 Drive14 Drive15 Drive16
F5 Drive17 Drive18 Drive19 Drive20
F6 Drive21 Drive22 Drive23 Drive24
F7 Drive25 Drive26 Drive27 Drive28
F8 Drive29 Drive30 Drive31 Drive32