HighPoint RocketRAID 644LS - Manual (Page 6)

6
Using the RocketRAID 64xL
RocketRAID 64xL BIOS
After installing the RocketRAID 64xL RAID Host Adapter, and powering
on the system, the adapter BIOS should post.
The BIOS will scan for devices and display information about each disk.
When prompted, press “Ctrl + H” to access the RocketRAID 64xL BIOS
Utility.
Note: Scan time may vary depending on the disk’s make/model and
disk related features such as Staggered Drive Spinup.
Driver and Software Installation (Windows 7, Vista, 2008)
1.
After installing the RocketRAID 64xL host adapter, boot to the
Windows operating system.
2. Windows should automatically detect the card, and displays the
“Found New Hardware Wizard”. Select “Locate and install driver