Settings, Display settings, Quantities and units – Vaisala MM70 User Manual
Page 26: Rounding, Figure 11, Display setting menus, Settings display settings
USER'S GUIDE____________________________________________________________________
Settings
Display Settings
0605-102
Figure 11
Display Setting Menus
Quantities and Units
1. Open
the
MENU. First press an arrow key, and then press the
OPEN key.
2. Select
Display. Press the right arrow key.
3. Select
Quantities and Units. Press the right arrow key.
4.
Select the desired quantity with the up/down arrow keys and
press the SELECT key.
5.
To change the unit, select the desired quantity with arrow keys
and press the UNIT key.
6.
To hide a quantity, select the desired quantity with arrow keys
and press the HIDE key.
7.
To return to the basic display, press the EXIT key.
8.
If you want to check environment settings, press the YES key (if
requested), otherwise press the NO key.
Rounding
You can select one or two decimal display by using the Rounding
function. The default setting is rounding off (=two decimal display).
24 __________________________________________________________________ M210878EN-A