Vaisala HMP155 User Manual
Page 31
Chapter 4 ________________________________________________________________ Operation
VAISALA _______________________________________________________________________ 29
Table 9
Calibration and Adjustment Commands
Command Description
#
Force connection settings 19200 baud, N, 8, 1
ACAL [0/1]
Analog output calibration
CDATE
Set the calibration date
CRH
Relative humidity calibration
CT Temperature
calibration
*
CTA
Additional temperature probe calibration *
FCRH
Relative humidity calibration after sensor
change
CTEXT
Give the text to calibration information field
L
Displays user adjustment parameters
LI
Displays new values for the user adjustment
parameters
Table 10
Setting and Testing the Analog Outputs
Command Description
AMODE
View the analog output modes
ASEL
Set or view analog output quantities and
scaling
AERR
Change the analog error output values
ATEST
Force the analog outputs to entered values
Table 11
Other Commands
Command Description
?
Output information about the device
??
Output information about the device in POLL
mode *
ERRS
List present probe errors
FILT [0.1…1]
Set the result filtering
HELP
Lists the available commands
PRES [hPa]
Set the value for pressure compensations
RESET
Resets the probe.
VERS
Display the software version information
XHEAT
Sensor heating *
XPRES [bar]
Set the value for pressure compensations,
temporarily