Ag Spray Equipment BA6D_BA8D - Manual (Page 5)

Back Rack
(w/Vertical Mounts)
8.14
8.3
8.13
8.2
8.5
8.12
8.8
8.15
8.4
8.11
8.16
8.4
8.10
8.9
8.7
8.1
8.6
7.5
7.2
7.4
7.4
7.1
1
2
6
3
4
5
8.11
8.4
8.4
8.7
8.16
2
NOTE:
Mounting angles (Item 2) are used when the boom
is positioned in the "high" position. Otherwise the U-
bracket (Item 3) is bolted to the top holes in the upright
angle (Item 7.1).
3
Mounting Angles ARE Used
2
3 3
2
Mounting Angles are NOT Used
Page 5
Center "Back Rack" Mounted
in the "High" Position
Center "Back Rack" Mounted
in the "Low" Position
Item
No
FIMCO Part
Number
Qty Description
List
Price
1 5006307 2 5/16"-18 Hex Whiz (Flange) Locknut .25
2 5022238 2 Mounting Angle 3.10
3 5038317 2 U-Bracket 7.64
4 5101065 2 Hair-Pin Cotter (0.120" Dia.) .40
5 5101231 2 Pin 3.50
6 5117300 2 5/16"-18 x 1" Flange Whiz Lock Screw .22
7 5275256 2 Upright Assembly 27.50
7.1 5022255 1 Boom Mounting Angle 17.60
7.2 5006337 2 1/2"-13 Hex Whiz (Flange) Locknut .30
7.3 5006307 4 5/16"-18 Hex Whiz (Flange) Locknut .25
7.4 5034159 2 Square U-Bolt, 5/16" x 1 5/16" x 1 7/8" .65
7.5 5034019 2 H.H.C.S., 1/2"-13 x 1 1/4" .48
8
Center Rack
Assembly
1 BA6D & BA8D Boom Center Section
8.1 5006054 4 3/8"-16 Hex Nut .25
8.2 5006091 4 1/2"-13 Hex Locknut .25
8.3 5006142 2 Hex Jam Locknut, 1/2" .25
8.4 5006307 8 5/16"-18 Hex Whiz (Flange) Locknut .25
8.5 5034074 2 H.H.C.S., 1/2"-13 x 7" 1.90
8.6 5034107 2 3/8" x 4" Eyebolt, Turned, Zinc-Plated 1.52
8.7 5034159 4 Square U-Bolt, 5/16" x 1 5/16" x 1 7/8" .65
8.8 5034308 4 H.H.C.S., 1/2"-13 x 2 1/4" .68
8.9 5273315 1 Center Boom Weldment 63.57
8.10 5009635 1 Top Bar Tube (257 Boom) 15.78
8.11 5022256 2 End Angle (257 Boom) 5.11
8.12 5080012 2 Center Hinge Section 12.45
8.13 5080011 2 Outer Hinge Section 18.93
8.14 5271580 2 Spring Connector Weldment 6.75
8.15 5019097 2 Hinge Spring 3.50
8.16 5082006 2 "S" Hook .55