beautypg.com

X Rockers 06107 User Manual

Page 3

background image

FUNCTIONS:

Foldable construction for ease of storage and portability.
Side control panel with volume, bass control, input/output jacks, and band switch.
Ergonomic design with full back support.

Wireless audio transmission

Easy to clean heavy duty upholstery grade vinyl cover.

SET UP:

Always make sure the backrest is locked before sitting in the chair.

Excessive sound pressure from earphones and headphones can cause hearing loss.
Children under the age of 13 should not use this product without adult supervision.
Strictly for indoor use. Do not expose to direct sunlight, moisture or extreme temperatures.
If the cover becomes wet, disconnect the power immediately and don't use until it is completely dry.

When using in wireless mode connect the audio cable to the RX. Do NOT connect the audio input directly to the X Rocker

or the device will be DAMAGED.

The maximum input of the TX box is 1V. If the input is over 1V, the sound can become distorted or fuzzy. If the Sound

coming out of the chair is fuzzy at low volumes, lower the volume on the audio source (ex. The TV, Mp3,etc) and the
distortion should go away.

Do not mix alkaline, standard carbon-zinc, or rechargeable Ni-cad, NiMH, etc.
Do not mix old and new batteries.

Excessive use of audio equipment could lead to hearing loss.

Do not attempt to remove the cover or any components. Removal of the cover or tampering with components puts

you at risk for injury or death from electrical shock.

Lift the X Rocker out of the box .

Follow above diagrams to install the backrest.
Review the set-up diagrams to familiarize yourself with the X Rocker's components, accessories, and set-up.
When used in wireless mode, make sure that the control panel is not more than 65.6ft / 20 meters from the audio source and

6.5ft / 2 meters from a power source.

Unpack the power adapter, plug it into a power outlet and connect it to the power jack (A7) on the control panel.
Press the power button (A6) and confirm that the power indicator light (A1) is on. In wireless mode, turn on the power to the

TX box (A12), confirm that its indicator light is on, and check that the band selected on the TX box (A13) is the same as that
selected on the control panel (A3) of the X Rocker.

Follow the diagrams to connect the X Rocker to the audio source of your choice in wired or wireless mode.
Adjust the bass and volume levels to your preference

start rocking.

Position the chair on the floor

READ BEFORE USAGE:

Need Help? Email: [email protected] Web: www.thexrocker.com
Phone:1 931 359 2603, In Europe, call +44 (0)845 468 0262

3