Options and settings, Digital radio settings, Fm radio settings – Pure Evoke D4 User Manual

Page 15

Digital radio settings

Autotune

You can use the autotune function to automatically scan for new digital radio stations and remove
inactive ones.
Note: Autotune is only available when you have selected ‘Digital radio’ as the radio source.
To carry out an autotune:
1. Press

Menu.

2. Turn and press the

Select dial to choose ‘Autotune’. The number of stations found will be

displayed during the autotune.

When the autotune has finished, Evoke will tune to the last station that you were listening to.

FM radio settings

FM stereo option

You can choose between ‘Stereo’ or ‘Mono’ reception when listening to FM radio. You may want to
choose Stereo if listening using headphones.
Note: The FM stereo option is only available when you have selected ‘FM radio’ as the radio source.
To change between Stereo or Mono reception:
1. Press

Menu.

2. Turn and press the

Select dial to choose ‘FM stereo’.

3. Turn and press the

Select dial to choose between ‘Stereo’ or ‘Mono’ FM reception.

FM tuning mode

Note: The FM tuning mode option is only available when you have selected ‘FM radio’ as the radio
source.
Press

Menu and turn and press the Select dial to choose ‘FM tuning mode’. Choose from the following

two modes:

Seek

When you turn the

Select dial, the radio tunes to the next station with a good signal.

Manual

When you turn the

Select dial, the radio tunes up or down the FM radio frequency range by 0.05 MHz.

Options and settings