beautypg.com

Setting the alarm & timers, Setting an alarm, Cancelling a sounding alarm – Pure Evoke D4 User Manual

Page 13: Snoozing a sounding alarm, Alarm volume

background image

11

Setting an alarm

Evoke has two alarms which can switch the radio on and tune to a
digital or FM radio station or sound an alarm tone.

1. Press the

1

or

2

button.

2. Turn and press the

Select dial to select ‘On’. The alarm is now

active.

3. To set the time you want the alarm to sound turn the

Select dial

to adjust the hours and then push to confirm. Repeat to adjust
the minutes.

4. Turn and press the

Select dial to choose when you want the

alarm to repeat. The available options are ‘Daily’, ‘Weekdays’,
‘Weekends’ or ‘Once only’.

5. Turn and press the

Select dial to choose the type of alarm you

want to sound: ‘DR’ (digital radio), ‘FM’ or ‘Tone’. If you select
‘Tone’, there are no further options.

6. For DR (digital radio) and FM radio alarms only, push the

Select

dial to select ‘Select station’ and choose the radio station you
want to use for the alarm.

For digital radio alarms

Select ‘Last listened’, or a preset station. If you select ‘Last
listened’ the alarm will tune to the last digital station you listen to
before the alarm sounds.

For FM radio alarms

Choose between ‘Last listened’ or a preset station. If you select
‘Last listened’ the alarm will tune to the last FM station you listen
to before the alarm sounds.

7. If you have selected a digital or FM radio alarm you can turn the

Select dial to adjust the volume level for the alarm.

That’s it! You can see if the alarm is currently switched on in the
‘Full screen time’ display (see page 6). Alarms can be set
and adjusted from standby by pressing the

1

or

2

button.

Note: The alarm function does not work when Evoke is being

powered by the ChargePAK F1.

Cancelling a sounding alarm

To cancel a sounding alarm, press either the

Menu, Source,

1

,

2

or

Select dial. If you press the Standby button during a

sounding alarm, Evoke will enter standby.

Snoozing a sounding alarm

Tap the

SnoozeHandle to snooze a sounding alarm for the specified

time (default 10 minutes).

08:30

08:30

22:45

08:30

08:30

The alarm is set to

sound at 8:30 am

Alarm volume

Setting the alarm & timers

Alarm time

08:00

On

Alarm 1 Setup

Alarm repeat

Daily

Alarm source

FM

Alarm FM

Last listened

Alarm saved

EN