Pure Evoke D4 Mio with Bluetooth - Manual (Page 15)

13
Changing the alarm snooze time
1. Press Menu.
2. Turn and press the Select dial to choose ‘Clock’.
3. Turn and press the Select dial to choose ‘Set snooze time’.
4. Turn and press the Select dial to change the snooze time
between 1 and 59 minutes.
Setting the kitchen timer
Evoke has a countdown timer which will sound an alarm after a set
time period.
To set the kitchen timer
1. Press the Timer button, turn the Select dial and push to
select ‘Kitchen timer’.
2. Turn the Select dial to change the hours and push to confirm.
Turn again to change the minutes and push to confirm and start
the countdown timer.
The alarm will sound after the time period you have set whether
the radio is on or in standby. Cancel the beeping alarm tone by
pressing any button on the radio.
To stop and reset the kitchen timer
To stop and reset the countdown timer to zero before it sounds a
beeping tone, press and hold down the
Timer button for three
seconds until you see the message ‘Timers cleared’.
Setting the sleep timer
Evoke has a sleep timer that switches your radio into standby (or off if
powered by a ChargePAK) after a set time period.
To set the sleep timer
1. Press the Timer button, turn the Select dial and push to select
‘Sleep timer’
2. Turn the Select dial to increase the duration of the sleep timer
from 15 to 90 minutes. Press the Select dial to start the sleep
timer.
The time remaining until shut-down is displayed on the right of
the full-screen time view.
To cancel the sleep timer
Press and hold the Timer button until you see the message
‘Timers cleared’.
01 hours 00 minutes
Kitchen timer
45 minutes
Set sleep time
08:30
45
Timers cleared
Timers cleared
01 hours 30 minutes
Kitchen timer
5 minutes
Set snooze time
EVOKE_D4_Mio_Bluetooth_v2_UKAus.indb 13 8/15/2014 9:47:47 AM