Cancelling an alarm, Alarm volume 08 10 – Pure Orla Kiely User Manual

Page 11

Text mode
Original mode

8. If you have selected a digital or FM radio alarm you

can push the

Tune dial to select ‘Alarm volume’

and turn to adjust the volume level for the alarm
from 1 (very quiet) to 32 (very loud).

That’s it! You can see if the alarm is currently
switched on in the ‘Full screen time’ display (see
page 7). Alarms can be set and adjusted from
standby by pressing the

Timer button.

Note: An outlined bell shows that the alarm will not

sound within the next 24 hours.

Note: The alarm function does not work when

Evoke Mio is being powered by the ChargePAK E1.

Cancelling an alarm

When a tone alarm is sounding, push the

Tune dial or

press

Standby to cancel the alarm. To cancel a digital

radio or FM radio alarm and return the radio to standby,
press the

Standby button.

08:30

22:45

08:30

The alarm is set to

sound at 8:30 am

Alarm volume

Orla_Mio_manual-v4-UK-Aus.indb 9

12/21/2012 4:49:57 PM