Pure Orla Kiely - Manual (Page 10)

8
Setting the alarm
Evoke Mio has an alarm which switches the radio on
(if in standby mode) and tunes to a digital or FM radio
station or sounds an alarm tone.
1. Press the
Timer button, turn the Tune dial and
push to select ‘Alarm settings’.
2. Push the Tune dial to select ‘Set alarm’, scroll to
‘On’ and push the Tune dial to select. The alarm is
now active.
3. Push the Tune dial to select ‘Set time’. To set the
time you want the alarm to sound turn the Tune
dial to adjust the hours and then push to confirm.
Repeat to adjust the minutes.
4. Push the Tune dial to select ‘Set days’.
5. Turn the Tune dial to choose when you want the
alarm to repeat. The available options are ‘Daily’,
‘Weekday’, ‘Weekend’, ‘Saturday’, ‘Sunday’, or
‘Once only’.
6. Push the Tune dial to select ‘Set mode’ and
choose the type of alarm you want to sound: digital
radio, FM radio or tone. If you select ‘Tone’, there
are no further options.
7. For digital radio and FM radio alarms only, push the
Tune dial to select ‘Select station’ and choose the
radio station you want to use for the alarm.
For digital radio alarms
Select ‘Last tuned’, or a digital station from the
station list. If you select ‘Last tuned’ the alarm will
tune to the last digital station you listen to before the
alarm sounds.
For FM radio alarms
Choose between ‘Last tuned’ or a preset station.
Setting the alarm & timers
Set alarm
Off
07:00
08:00 set hours
On
Off
Orla_Mio_manual-v4-UK-Aus.indb 8 12/21/2012 4:49:57 PM