Pure Sirocco 150 - Manual (Page 12)

10
A set timer is indicated by the ‘TIMER’ symbol on the screen.
To toggle the timer on and off, press the Timer button once.
Setting the time and date
Your Sirocco 150 automatically adjusts the time using a DAB signal. However, If you have a poor
signal or simply wish to set the clock yourself, you can do so from the menu.
Please note: When a DAB time signal is received, Sirocco 150 will default to this automatically.
To set the time
1. Press Menu, then select ‘Clock’
2. You will now see the Set time screen. Using the navigation dial, select 12 or 24-hour clock
3. Set the hours
4. Set the minutes
BTccX\T
!#W^da)
BTccX\T
!#7^da)
BTccX\T
!#7^da $)
Setting the timer
The timer function allows you to set your Sirocco 150 to switch on to your preferred source, and
then switch off again at specifed times.
To set the timer
1. Press and hold Timer to enter the Set timer screen. You can also accees Timer from the main menu.
2. Using the navigation dial, set the times you wish your Sirocco 150 to switch on, then off
3. Select how frequently you want the timer to go off (Once Only or Daily)
4. Select the source you would like your Sirocco 150 to play when it switches on - DAB, FM, CD, iPod, USB,
SD Card or Tone.
5. Finally, set your preferred volume level for the timer.
2[^RZ
1. 2. 4. 3.
After setting the time, you will be asked to set the date. Use the navigation dial as before.
>UU
BTccX\Ta
Timer )
BTccX\T^]
3PX[h
BTcSPhb
301
BTc\^ST
%
BTce^[d\T
112APSX^
^f_[PhX]V)HTPW
TIMER
2. 3. 4. 5.