Pure ONE Elite Series 2 - Manual (Page 15)

11
Options and settings
Press the Menu button to access the options menu, turn the dial to scroll through and change
the options and push the dial to select.
Digital radio options
Autotune
Scans all digital frequencies for stations, automatically adds any new stations found to the
station list and removes inactive stations. To stop an Autotune press Menu.
Intellitext options
Press Menu, select Intellitext and turn the dial to access the following options for managing
Intellitext messages.
Set timeout: Choose to delete old Intellitext messages after 1 week (default) or 1 day.
Clear all: Delete all stored Intellitext messages immediately.
FM options
FM tuning mode
Seek: When you turn the dial, the radio tunes to the next station with a good signal.
Manual: When you turn the dial, the radio tunes up or down in steps of 0.05 MHz.
FM stereo
Choose from Stereo (default) or Mono. Mono may improve clarity where stereo signals are
weak.
General options
Backlight
Timed off: The backlight turns on for 7 seconds when any button is pressed (default).
Off: The backlight does not switch on.
On: The backlight is always on when the radio is on.
Audio
Turn the dial to adjust the treble or bass and push to confirm.
Bass: Adjust the bass between -5 (minimal bass), 0 (neutral) and 5 (maximum bass).
Treble: Adjust the treble between -5 (minimal treble), 0 (neutral) and 5 (high treble).
Set clock
The clock will automatically set itself and also update for GMT/BST clock changes in the
UK. However, if you cannot receive a digital signal, the time and date can be manually set by
selecting Set clock from the options menu.