Pure ONE Elite Series 2 - Manual (Page 13)

9
Setting the alarm & timers
Setting the alarm
1. Press the (Alarm/Timer) button and select Alarm to display the alarm status screen.
2. Push the dial to enter the alarm menu. You can scroll through six alarm options on the
bottom line of the display, while the top line displays their current setting. To change a
setting, push the dial, turn it to make your selection and then push it to confirm the change.
Set alarm
Push dial to choose between On (alarm sounds) or Off (alarm does not sound). The
symbol on the screen indicates that the alarm is on.
Set time
Push dial to set the alarm time. Turn the dial to set the hour then push to confirm. Repeat to
set the minutes.
Set days
Push dial to set the days that the alarm sounds. Choose between: Daily (every day),
Weekday (Monday to Friday), Weekend, Saturday or Sunday or Once only (no repeat).
Set alarm mode
Push dial to choose between: Digital radio, FM or Tone (buzzer).
Select station
If you’ve set alarm mode as Digital radio or FM, choose a digital station or an FM preset
and push to confirm. Last tuned tunes to the most recent station.
Alarm volume
If the alarm mode is set to Digital radio or FM, push the dial to change the alarm volume.
Turn the dial left to decrease the alarm volume or right to increase it then push to confirm.
Cancelling a sounding alarm
To cancel a tone alarm push the dial or press the Standby button.
To cancel a radio alarm press any button.
Note: A sounding radio alarm will switch off after one hour unless you cancel it.
Using alarms with ChargePAK C6L or batteries fitted
When a ChargePAK rechargeable battery or 'C' cell batteries are fitted and the unit is not
connected to mains power the radio switches off completely when the Standby button is
pressed. In this case, the message
Disabling alarm will be briefly displayed after the Standby
button is pressed and the alarm will not sound.