Pure Elan 2 - Manual (Page 11)

9
Options and settings
EN
Options and settings
Press the Menu button to access the options menu, rotate the Tune dial to scroll through and
change the options and push to select.
DAB options
Autotune
Scans all DAB Band III frequencies for stations, automatically adds any new stations found to the
station list and removes inactive stations. To stop an Autotune press Menu.
Intellitext options
Select ‘Intellitext’ and use the Tune dial to access the following options for managing Intellitext
messages:
Set timeout
Choose to delete old Intellitext messages after 1 week (default) or 1 day.
Clear all Delete all stored Intellitext messages immediately.
FM options
FM tuning mode
Seek When you rotate the Tune dial, the radio tunes to the next station with a good signal.
Manual When you rotate the Tune dial, the radio tunes up or down in steps of 0.05 MHz.
FM stereo mode
Choose from Stereo (default) or Mono. Mono may improve clarity where stereo signals are weak.
General options
Backlight
Timed The backlight turns on for 7 seconds when any button is pressed (default).
Off The backlight does not switch on.
On The backlight is always on when the radio is on.
Audio
Push the Tune dial to select, then rotate to adjust the treble or bass and push to confirm.
Treble Adjust the treble between -5 (minimal treble), and 5 (high treble).
Bass Adjust the bass between -5 (minimal bass),and 5 (maximum bass).
Clock
The clock will automatically set itself and also update for GMT/BST clock changes. However, if you
cannot receive a DAB signal, the time and date can be manually set by selecting Set Clock from
the options menu.