Pure MOVE - Manual (Page 10)

8
Hints and Tips
Display says ‘ No stations available’
Check that your aerial is fully extended. Use Autotune to search for stations.
Try adjusting your aerial or radio position.
(<>) Secondary DAB services
Secondary services accompany some stations, providing extra information or
alternative content and may only be broadcast at certain times. If a station
has secondary services available, the station shows ‘>>’ next to its name in
the station list and the secondary service appears next to the station in the
list. A secondary service has a ‘<<’ before its name in the station list.
(?) Inactive or unavailable DAB stations
Inactive or unavailable stations are those which appear on the station list but
are not currently available because either you are outside the broadcast area,
have lost reception or the station is not currently broadcasting. Unavailable
stations have a ‘?’ before their name on the station list. If you select a station
which has this symbol, your radio tries to tune in or returns to the previous
station.
Battery power indicator is flashing
This may happen if there is a problem charging your ChargePAK. Check the
connections to your power supply. A replacement ChargePAK may be required
if this does not solve the problem.
My unit won’t turn off
Make sure you Hold down the PWR button until the ‘Powering off...’ message
is shown. If this does not work for some reason, push the power reset button
with the tip of a pen or similar to switch your unit off without losing your
settings.
Resetting your Move
The reset option removes all presets, stored stations and favourite station
settings and resets all options to defaults.
1. Press and hold the menu button for around three seconds. The display
will show ‘Hold PWR to confirm reset...’
2. Press and hold the PWR button to confirm the reset or press no buttons
to cancel the reset.