Pure Contour D1 - Manual (Page 17)

15
ES EN
Options and settings
Press the Menu button to access the options menu, press or to scroll through and change
the options and press Select to confirm. Current value of settings are indicated by an
asterisk ( ).
Digital radio options
Autotune
Scans all digital frequencies for stations, automatically adds any new stations found to the
station list and removes inactive stations. To stop an autotune press
Menu.
FM radio options
FM Stereo
Choose from Stereo or Mono (default). Mono may improve audio clarity where stereo signals
are weak.
General options
Clock
The clock is automatically set if you have a good digital or FM (RDS) signal and will
automatically update for daylight saving time. You can adjust the following settings:
SET TIME Manually set the time and date if required.
12/24HR
Choose between 12 or 24 hour time display.
SNOOZE Set your preferred snooze duration for alarms.
SYNC TO Choose the radio source that you want to use for setting the time.
BOTH (Default) Set the time by using both the digital and FM
(RDS) radio signal.
DIGITAL Set the time using the digital radio signal.
FM Set the time using the FM (RDS) signal.
Backlight
DURATION
Choose how long the backlight remains switched on:
TIMED
The backlight turns on for 7 seconds when any button is
pressed (default).
OFF The backlight does not switch on
ON The backlight is always on when the radio is on.
LEVEL
Choose the brightness of the backlight:
AUTO
Adjusts automatically depending on the light level in your
room (default).
1-5 Set a brightness level between 1 (dim) and 5 (bright).