Outback Power Systems FW-IOB-D-120VAC Input/Output/Bypass Assembly - Installation Instructions - Manual (Page 8)

Figure 5: AC Breaker Bypass Slide Plate Installation
Parts:
1. 8-32 X .75 Machine Screw (2)
2. Nylon Washer (4)
3. 8-32 Nylock Nut (4)
4. AC Breaker Bypass Slide Plate (1)
5. FLEXware AC Breaker Bracket (1)
To Assemble:
1. Remove necessary circuit breaker knockouts (per IOB kit).
2. Install AC Breaker Bypass Slide Plate and fasteners as shown in
Figure 5.
3. Do not over tighten the Nylock nuts. Overtightening can
cause the AC Breaker Bypass Slide Plate to bind.
Installing the AC Breaker Bypass Slide Plate
900-0068-01-00 REV D www.outbackpower.com
European Sales Offi ce
C/ Castelló, 17
08830 - Sant Boi de Llobregat
BARCELONA, España
+34.93.654.9568
Corporate Offi ce
19009 62nd Avenue NE
Arlington, WA USA
(+1) 360-435-6030