Acesonic MULTI-FUNCTION KARAOKE PLAYER DGX-210 - Manual (Page 13)

10
Basic Operation
SYSTEM SETUP
Unload the Disc then:
LANGUAGE SETUP
TV SYSTEM
1) Press Direction KEY [ ] to choose “TV SYSTEM” .
2) Press Direction KEY [ ] to show Sub-MENU.
3) Press Direction KEY [ / ] to select the TV system [NTSC/ PAL/AUTO].
SCREEN SAVER
1) Press Direction KEY [ ] to choose “SCREEN SAVER”.
2) Press Direction KEY [ ] to show Sub-MENU.
3) Press Direction KEY [ ] to select “ON” or “ OFF”.
4) Press ENTER to confirm it.
If “ON” option is selected, the DVD will play the “SCREEN SAVER” when it stands by.
/
/
1) Press Direction KEY [ ] to choose “VIDEO”.
2) Press Direction KEY [ ] to show Sub-MENU.
3) Press Direction KEY [ ] to select Video Output Mode.
4) Press ENTER to confirm it.
＊NOTE: The Output Mode: YUV/TV-RGB/P-SCAN/YPBPR/PC-VGA/S-VIDEO. Make sure TV and DVD was in
RIGHT connection before setting.
VIDEO
/
/
1) Press Direction KEY [ ] to choose “TV TYPE”.
2) Press Direction KEY [
3) Press Direction KEY [
4) Press ENTER to confirm it.
＊NOTE: TV TYPE: 4:3PS, 4:3LB or 16:9. Some discs can not be played as your selection because
that disc was not recording in the same format.
] to show Sub-MENU.
] to select TV TYPE.
TV TYPE
/
/
1) Press Direction KEY [ ] to choose “PASSWORD”.
2) Press Direction KEY [ ] to show Sub-MENU.
3) Press the Numeric KEY to input new password if necessary.
4) Press ENTER to confirm it.
＊NOTE: The password should be four numbers. The default password is “0000”.
PASSWORD
/
1) Press Direction KEY [ ] to choose “RATING”.
2) Press Direction KEY [ ] to show Sub-MENU.
3) Press Direction KEY [ ] to select the “RATING” if necessary.
4) Press ENTER to confirm it.
＊NOTE: “RATING” can be set only in UNLOCK PASSWORD state. This function should be supported by the DISC.
RATING
/
/
Unload the Disc then:
Press SETUP KEY to open the Setup MENU.
Press Direction KEY [ ] to select the “LANGUAGE
SETUP”. The ub MENU: S -
OSD LANGUAGE
AUDIO LANGUAGE
SUBTITLE LANGUAGE
MENU LANGUAGE
/
OSD LANGUAGE
1) Press Direction KEY [ ] to choose “OSD LANGUAGE”.
2) Press Direction KEY [ ] to show Sub-MENU.
3) Press Direction KEY [ ] to select the language .
4) Press ENTER to confirm it.
/
/
Press SETUP KEY to open the Setup MENU.