Airlink101 AR686W - Manual (Page 5)

4
Configuring the Router
Note:
Prior to connecting the router, be sure to power off your
computer, DSL/Cable modem, and the router.
Step 1
Connect one end of a network cable to the WAN port of the router
and connect the other end of the cable to the DSL/Cable modem.
Step 2 Power on the modem.
Step 3
With another network cable, connect one end of the cable to your
computer’s Ethernet port and connect the other end to one of the LAN ports
of the router, as shown in the following figure. (After setup finishes, you can
remove the network cable between the computer and router if you want to
use wireless connection.)
Section 2