Monoprice 7845 MUA-46 - Manual (Page 6)

6 of 7
Top of
Display
*For screen with a hole
pattern in a pocket,spacers
go between Assembly
Adapter Plate and screen. Spacers
Mounting
Screw
M6&M8
Hole
M5 Hole Square
spacer
Note:
Recessed Mounting Holes.
If the mounting holes are recessed
into the back of the display, use the
supplied spacers to pack the
recessed hole. If the mounting
screw is M5&M6,use the
Spacers1.(K.1.)If the mounting screw
is M8,use the Spacers 2.(K.2.)
Ensure that the brackets are
Mounting the Assembly Adapter Plate to screen
Modify the Adapter Plate
B
Adaptor and hooks
Adaptor and hooks
Adaptor Modify the Assembled Adapter Plate
Slide the adapter brackets into Assembled adapter plate slightly.
Place the Assembled Adapter Plate on the back of the display with
one Adapter Bracket aligned with a set of vertical mounting
holes.Then,slide the other Adapter Bracket in or out until it aligns
with the second set of vertical mounting holes.The Adapter should
be horizontally centered on the back of the flat panel display.
Adaptor and hooks Use four M6x16 screws and four iron spacer
and tighten it with Phillips Head Screw Driver.
Adapter
Bracket
Screw iron spacer
Back of Screen
securely fixed to the display.
C