Asus Motherboard A7N8X-VM - Manual (Page 41)

ASUS A7N8X-VM Motherboard 2-9
MDA Access Control [PCI]
This field selects the MDA Access cycles direction. Configuration options: [AGP]
[PCI]
Primary Video [PCI]
This will switch the PCI Bus scanning order while searching for a video card. This
allows the user to select the type of Primary VGA in case of multiple video
controllers. Configuration options: [PCI] [AGP/Onboard]
Onboard TV-out format [PAL]
This field sets the onboard TV-out format. Configuration options: [PAL] [NTSC]
2.4.2 Onboard Devices Configuration
Onboard Floppy Controller [Enabled]
This field allows you to enable or disable the onboard floppy controller.
Configuration options: [Enabled] [Disabled]
Serial Port1 Address [3F8/IRQ4]
This field allows you to set the address for the onboard serial connector.
Configuration options: [3F8/IRQ4] [2F8/IRQ3] [3E8/IRQ4] [2E8/IRQ3]
Serial Port1 Mode [Normal]
This field allows you to set the serial port mode. Configuration options: [Normal]
[IrDA] [ASK IR]
Parallel Port Address [Disabled]
This field allows the BIOS to select the Parallel Port Base Address. Configuration
options: [Disabled] [378] [278] [3BC]