Monoprice 7535 MS-03 - Manual (Page 2)

NOTE: Read entire instruction sheet before you start installtion and assembly.
WARNING
• Do not begin to installation of the product on you have read and understand the
instructions and warnings contained in this Installation Sheet. If you have any question
regarding any of the instruction or warning, Please contact your local distributor.
• Make sure that the supporting surface will safely support the combined load of the
equipment and all attached hardware and components.
• Never exceed the Maximum Load Capacity.
• Always use an assistant or mechanical lifting equipment to safely lift and position
equipment.
• Tighten screws firmly, but do not over tighten. Over tightening can damage the items,
greatly reducing their holding power.
• This products intended for indoor use only. Use of this product outdoors could lead to
product failure and personal injury.
1
Component Checklist
IMPORTANT: Ensure you have received all parts against the component checklist prior to installing. If any parts
are missing or faulty, telephone the special franchiser for a placement.
Package M
Speaker Stand Base
A
(x1)
Tools required
Phillips Head Screw driver(200mm length exclude the handle)
M6 Socket and Wrench ·
·
M5x16
M-B
(x1) M5x12
M-A
(x4) Steel Isolation Spike (x4)
M-C
Rubber Footpad (x4)
M-D
M6 Nut (x4)
M-E
Self Adhesive Pad (x4)
M-F
2
Pillar
B
(x1)
Mounting P a 1
C
l te (x1) Mounting 2
D
Plate (x1) Plastic Cover
E
(x1)