Monoprice 4567 Wall Mount Bracket - Manual (Page 3)

Step Five
Attach the Display Mounting Plate to the Display - After
having prepped your flat panel display by removing any table
stands as instructed in the manual for your display, attach
the display mounting plate to the back of your display. Use
four machine screws provided by your display manufacturer
to attach the plate to the back of the display. If no screws
were included with your display, contact the manufacturer of
your display to find out the appropriate size needed and
purchase them at a local hardware store.
Step Six.
Attach the Display to the Mounting Arm - Lift the display up to the extension arm on the wall plate
assembly and reattach the display plate to the end of the wall plate assembly arm and fasten it with
the allen bolts you removed earlier.
Congratulations! You’re done.
The mount comes with an adjustment knob on top to adjust the tension of the side to side swivel and
allows you to lock the display in position. The arm allows the display to extend, retract, tilt up and tilt
down. There is a tension adjust lever on the side of the mount that allows you to adjust the tension of
movement and lock the extension and tilt position.
Figure 5
Figure 6