ATEN CN-5000 - Manual (Page 5)

w
To help protect your system from sudden, transient increases and
decreases in electrical power, use a surge suppressor, line conditioner, or
un-interruptible power supply (UPS).
w
Position system cables and power cables carefully; Be sure that nothing
rests on any cables.
w
When connecting or disconnecting power to hot-pluggable power
supplies, observe the following guidelines:
§ Install the power supply before connecting the power cable to the
power supply.
§ Unplug the power cable before removing the power supply.
§ If the system has multiple sources of power, disconnect power from
the system by unplugging all power cables from the power supplies.
w
Never push objects of any kind into or through cabinet slots. They may
touch dangerous voltage points or short out parts resulting in a risk of fire
or electrical shock.
w
Do not attempt to service the device yourself. Refer all servicing to
qualified service personnel.
w
If the following conditions occur, unplug the device from the wall outlet
and bring it to qualified service personnel for repair.
§ The power cord or plug has become damaged or frayed.
§ Liquid has been spilled into the device.
§ The device has been exposed to rain or water.
§ The device has been dropped, or the cabinet has been damaged.
§ The device exhibits a distinct change in performance, indicating a
need for service.
§ The device does not operate normally when the operating instructions
are followed.
w
Only adjust those controls that are covered in the operating instructions.
Improper adjustment of other controls may result in damage that will
require extensive work by a qualified technician to repair.
2005-09-13
CN-5000 User Manual
v