Anthem MRX 700 - Manual (Page 27)

19
3.5 SOURCE SETUP
Inputs and preset listening mode presets are configured in this section.
Audio / Video recording device connected to:
Select the input that the output of your recording device is connected to.
HDMI Audio Output:
When set to AVR (recommended), no audio is sent to the TV. When set to AVR+TV or TV, audio is sent to the
TV but the audio format for all playback is according to the TV’s capability – 2-channel not multichannel.
HDMI CEC:
When On, allows controlling one HDMI-connected component using another’s remote control, as long as
CEC is also on in the other components. Note that when component brands are mixed this control system
may not be reliable.
Selecting Main Source Setup displays this menu:
Name:
The source names that appear on the front panel display and some other menus can be changed, up to 8
characters long. Example: Rename “BDP” to “Blu-ray”.
• Highlight “Name” and press SELECT. The first character (a space) will be highlighted in red.
• Use the 56 buttons to change characters. Change the first one to “B”.
• Use the 34 buttons to move to each remaining character and complete the renaming.
• Press SELECT to return to the menu.
3. SETUP
continued …
Audio/Video Setup and Presets
Main Source Setup 4
Advanced Source Setup
Listening Mode Presets
Video Mode Presets
Audio Rec Device Connected to
None
Video Rec Device Connected to None
HDMI Audio Output AVR
HDMI CEC Off
Main Source Setup
Source 1 of 9 (BDP)
Name BDP
Video Output Configuration VidOut 1
Main Video Input HDMI1
Main Audio Input Dig HDMI
Bass Manager Movie