Yetter 6200-109 V-Close Wheel Kit CNH Row Unit - Manual (Page 6)

6
ASSEMBLY INSTRUCTIONS
STEP 6. Attach the close wheel arm assembly to the right hand side of
the 6200-202 – close wheel mount and the row unit by inserting the 6000-
523 – eccentric bushing into the close wheel arm assembly and securing
with the ½” x 2-1/2” bolt, link, ½” flat washer and lock nut. Attach the link
to the close wheel bracket using a ½” x 1” bolt and lock nut.
STEP 7. Attach the wheels to the 6000-247 arm using a 5/8” x 4” bolt, flat
washer, bushing, spacer and 5/8” lock nut.
NOTE: In certain conditions, seed to soil contact and residue flow can be
improved by spacing closing wheels further apart and or staggering them.
To space closing wheels further apart place the spacers, washers and
bushings between the closing wheel and the arm. To remove space
between wheels, place the spacers, washers and bushings on outside of
wheel. Two mounting holes, for each closing wheel are provided to
stagger closing wheels. To stagger closing wheels remove one closing
wheel from the arm and reassemble in the other hole.