Yetter 3500 Series Toolbar Rotary Hoe - Manual (Page 17)

17
FIELD OPERATION
PARKING THE ROTARY HOES
3400 HOES
Lower the parking stand. Lower rotary hoe and loosen center link if necessary. Release
the latch levers and quick coupler, or raise center link latch handle and remove hitch pins,
then move tractor.
3500 HOES
Fold wings to the down position unless rear parking stand is used. Lower the parking
stands. Lower the rotary hoe and loosen center link if necessary. Release the latch
levers and quick coupler, or raise center link latch handle and remove hitch pins, then
drive tractor away.
CAUTION: NEVER UNHOOK FROM A FOLDED ROTARY HOE UNLESS REAR
PARKING STANDS ARE USED.
TRANSPORTING THE HOES
3400 HOES
To change from field to transport position, raise the hoe. Make certain the SMV symbol is
in place before transporting. DO NOT exceed 15 mph during transport.
3500 HOES
To change from field to transport position, raise the hoe, and then fold. Make certain
there is adequate clearance for the wings to fold without hitting obstructions. Check
gauge wheel positions for adequate tractor and cab clearance. Make certain the SMV
symbol is in place. DO NOT exceed 15 mph during transport.
CAUTION: STAND CLEAR OF FOLDING WING!
CAUTION: ALWAYS FOLLOW ALL STATE, FEDERAL, AND LOCAL LAWS
WHEN TRANSPORTING ROTARY HOE ON PUBLIC ROADS.