Yetter 3500 Series Toolbar Rotary Hoe - Manual (Page 10)

10
HYDRAULIC ASSEMBLY
KEY QTY. PART NO. DESCRIPTION
1 2 2515-172 CLEVIS PIN FOR (3X16 & 4X16) CYLINDERS
3554-303 CLEVIS PIN FOR 5 X 16 CYLINDERS
2 4 2570-465 7 GA. X 3-3/4 HAIRPIN COTTER ZYD.
3 2 3500-387 3” X 16” ASAE CYLINDER, 1-1/4” ROD DIA., PAINTED
(3500 SERIES EXCEPT 3541 & 3546)
3500-388 4” X 16” ASAE CYLINDER (3541 & 3546)
2515-826 5” X 16” SAE-35016 CYLINDER, (54’ & 60’)
4 8 2530-208 3/8” X 2-1/2” ROLL PIN ZYD.
5 12 2527-564 1” ID X 1-1/2” OD X 14 GA. MACH BUSHING ZYD.
4 2527-561 1-1/4 ID X 2-1/4 OD X 14 GA. MACH BUSHING ZYD. (54’& 60’)
6 4 3500-390 HINGE WHEEL (1” ID X 4-3/8 OD)
4 3554-204 54’ HINGE WHEEL W.A. (54’ & 60’)(1.25 ID X 4.5 OD)
7 2 3500-226 HEAVY HINGE LEVER W.A. (1” PIVOT HOLES)
2 3560-200 60’ HINGE LEVER W.A. (1.5” AND 1.25” PIVOT HOLES)
2 3554-205 54 FT. HINGE LEVER W.A. (1” ID BUSHING, 1.25 CYL CLV)
8 4 2520-543 7/8-9 JAM HEX NUT ZYD.
9 4 2502-604 7/8-9 X 3-1/2” THREAD. TO HEAD TAP BOLT GR. 2 ZYD.
10 4 3500-308 HINGE PIN (1” D. X 8-3/4 LONG)
2 3560-301 60’ HINGE PIN UPPER (1.25 D. X 9.75 LONG)
10B 2 3554-310 HINGE LEVER PIN UPPER, (54’ & 60’)(1.25” D. X 8.75” LONG)
10C 2 3560-300 HINGE LEVER PIN LOWER, (54’ & 60’)(1.5” D. X 8.75” LONG)
11 1 2515-358 HOSE, ¼” X 50” W/-6 JIC ENDS (3521)
1 2515-362 HOSE, ¼” X 75” W/-6 JIC ENDS (3528 & 3530)
1 2515-364 HOSE, ¼” X 90” W/-6 JIC ENDS (3530 & 3534)
1 2515-366 HOSE, ¼” X 110” W/-6 JIC ENDS (3541)
1 2515-367 HOSE, ¼” X 135” W/-6 JIC ENDS (3546)
1 2515-397 HOSE, ¼” X 160” W/-6 JIC ENDS (3554)
1 2515-372 HOSE, ¼ X 200” (3560)
12 2 2515-356 HOSE, ¼” X 35” W/-6 JIC ENDS (3521)
2 2515-358 HOSE, ¼” X 50” W/-6 JIC ENDS (3528)
2 2515-360 HOSE, ¼” X 65” W/-6 JIC ENDS (3530)
2 2515-362 HOSE, ¼” X 75” W/-6 JIC ENDS (3534)
2 2515-365 HOSE, ¼” X 100” W/-6 JIC ENDS (3541)
2 2515-367 HOSE, ¼” X 135” W/-6 JIC ENDS (3546)
2 2515-387 HOSE, ¼” X 150” W/-6 JIC ENDS (3554)
2 2515-371 HOSE, ¼ X 180” (3560)
13 4 2515-405 CABLE TIES (3521)
6 CABLE TIES (3528, 3530)
8 CABLE TIES (3534)
10 CABLE TIES (3541, 3546)
12 CABLE TIES (3554, 3560)
14 2 2515-326 TEE FITTING, –6/-6/-6 JIC
15 4 2515-330 90 DEG FITTING, ¾” SAE TO –6 JIC, RESTRICTED
16 1 2515-353 HOSE, ¼” X 35” W/-6 JIC ENDS (3521)
1 2515-356 HOSE, ¼” X 50” W/-6 JIC ENDS (3528)
1 2515-358 HOSE, ¼” X 65” W/-6 JIC ENDS (3530)
1 2515-360 HOSE, ¼” X 75” W/-6 JIC ENDS (3534)
1 2515-365 HOSE, ¼” X 100” W/-6 JIC ENDS (3541)
1 2515-365 HOSE, ¼” X 100” W/-6 JIC ENDS (3546)
1 2515-366 HOSE, ¼” X 110” W/-6 JIC ENDS (3554)
1 2515-367 HOSE, ¼ X 135” (3560)
17 2 2515-386 HOSE, 3/8” X 50” W/-6 JIC ENDS
18 2 2515-327 ADAPTER, ¾ SAE TO –6 JIC
19 4 1000-361 13/16” UPPER SLEEVE, ZP. (54 FT. ONLY)
20 4 2515-827 REDUCER, (3554 & 3560)
3 X 16 SEAL KIT ROCKFORD/HYDRO-LINE 2515-338
COMMAND 2515-128(BLACK & YELLOW PISTON SEAL)
MONARCH 2515-338
PRINCE 1-1/8” ROD 2515-103
PRINCE 1-1/4” ROD 2515-265
4 X 16 SEAL KIT
ROCKFORD/HYDRO-LINE 2515-468
COMMAND 2515-144
MONARCH 2515-170
5 X 16 SEAL KIT PRINCE 2515-171