Yetter 2967-024 Titan Residue Manager - Manual (Page 9)

9
INSTALLATION INSTRUCTIONS
STEP 3. Attach the 2967-295 arm to the 2967-296 mount bracket using the 5/8” bolts, flat
washers, bushings, 2967-623 adjustment plate and 5/8” lock nuts. Also, install the ½” x 2” bolt,
2967-622 spacer, ½” lock nut, 2984-326 pin and 2570-446 bowtie cotter on the 2967-623
adjustment plate.
STEP 4. Assemble the residue manager wheel to the 2965-352-hub cap and the 2965-128-
hub/bearing assembly. Insert the D-bolt through the 1.50 O.D. x 21/32” I.D. x 3/16” thick flat
washer, then through the hub/bearing assembly. Use 4) 5/16 x 1-½ carriage bolts and 5/16-18
lock nuts per wheel.
NOTE: Assemble one wheel as a right hand wheel rotation and one wheel as a left hand wheel
rotation.
IMPORTANT: 2527-530 Washers must be installed or Residue Manager Wheel and hub assembly
will fall off during use.
NOTE: Use general-purpose grease before use of the Residue Managers.