Description, Maintenance – Yetter 2967-064 Residue Manager User Manual
Page 16

16
MAINTENANCE
Lubrication
CAUTION: To help prevent serious injury or death to you or others caused by
unexpected movement, service machine on a level surface. Lower machine to ground
or sufficiently lock or block raised machine before servicing. If machine is connected
to tractor, engage parking brake and place transmission in “PARK”, shut off engine
and remove key. If machine is detached from tractor, block wheels and use shop
stands to prevent movement.
CAUTION: Do not clean, lubricate, or adjust machine while in motion.
Use grease based on NLGI consistency numbers and the expected air temperature range during
the service interval.
Use a multi-purpose lithium, water resistant, moderate speed, and NLGI grade #2 grease.
Other greases may be used if they meet the following NLGI Performance Classification: GC-
LB
IMPORTANT: Some types of grease thickener are not compatible with others. Consult
your grease supplier before mixing different types of grease.
Alternative Lubricants
Conditions in certain geographical areas may require special lubricants and lubrication practices
which do not appear in the operator’s manual. If there are any questions, consult Yetter
Manufacturing Co. to obtain latest information and recommendation.
PART #
DESCRIPTION
OUNCES OF GREASE
2967-404
13” TAPER TOOTH R.M. WHEEL
1.12 OZ
2967-602
13” SHARK TOOTH R.M. WHEEL
1.12 OZ
2967-186
FLOATER WHEEL KIT W/R.M. WHEEL
2.08 OZ
2967-596
HEAVY DUTY OR BEVEL R.M. WHEEL W/
FLOATER WHEEL KIT
2.40 OZ
Storing Lubricants
Your machine can operate at top efficiency only if clean lubricants are used.
Use clean containers to handle all lubricants.
Store them in an area protected from dust, moisture and other contaminants.